News, Newsroom

New PowerBrick® version with new generation cell

Posted on by Content Team

Our PowerBrick® product range is expanding with 4 new versions using our new generation LiFePO4 lithium cells.

As a reminder, all our products now use the new generation cell which ensures a better service life (3000 cycles at 100% DoD at 1C, 4500 cycles at 80% DoD at 1C) and an increased energy density of +25%.

The PowerBrick 12V-30Ah makes its entry using the PowerBrick 12V-20Ah enclosure, i. e. an energy density increased by +50% in the same enclosure
The PowerBrick 12V-45Ah complements the 12V-40Ah version by using the same box (+12.5% more energy)
PowerBrick 12V-70Ah uses the same housing as the PowerBrick 12V-55Ah (+27% more energy)
Ditto for the PowerBrick 48V-72Ah which takes over the case of the 48V-61Ah version (+18% more capacity)

All previous ranges are preserved, and all now equipped with our new generation cell.

News, Newsroom

New high-performance lithium LiFePO4 cells

Posted on by Content Team
Lithium Iron Phosphate - LFP - LiFePO4-cell

After more than a year of intensive testing, we are now using a new high-performance lithium LiFePO4 cells to replace the cells used in our products.

This new generation of cell retains all the safety and robustness of those used in our products to date and adds two major improvements:

  • Specific Energy improved by 25% : It is possible to accommodate 1/4 more energy in the same volume.
  • Improved operation life by 50% : Cycling tests performed show a performance of 3000 cycles of full charge-discharge cycles (100% depth of discharge) at 1C. This represents a 50% increase in the number of cycles compared to the previous generation.
    At a DoD of 80% at 1C, the number of cycles performed rises to 4500.

Below chart shows the estimated number of cycles for our new generation of Lithium LiFePO4 cells, according to the discharge power and DOD figures. The test conditions are those of a laboratory (constant temperature of 25°C, constant charge and discharge power).

Lithium Iron Phosphate Life Cycle
Life Cycle chart of new LiFePO4 cell generation

We can read from the chart the below figures :

  • 3 000 cycles at 100% DoD @ 1C
  • 4 500 cycles at 80% DoD @ 1C
  • 10 000 cycles at 60% DoD @ 1C
  • etc.

It should be noted that following the number of completed cycles, the cell still have a nominal capacity > 80% of the original capacity.

Our main product ranges: PowerBrick, PowerRack and PowerModule, will benefit in the coming months from this new generation of cells with an increase in capacity, a reduction in weight but also a significantly improved lifespan.

Stay tuned for more information

News, Newsroom

Lithium batteries for the mini transat “La Boulangère”

Posted on by Content Team

Mini-Transat “La Boulangère” is a long course of 4050 nautical miles alone, on the smallest offshore racing boats, only 6.50m long, will be done in two stages. The first, departing from La Rochelle on September 22nd 2019, will go to Las Palmas de Gran Canaria located in the Canary Islands. The second of 2700 miles will last around two weeks for the fastest until the final finish in Le Marin en Martinique from mid-November.

For this 2019 vintage, we are accompanying skipper Bastian Oger in his race. Bastian reqyestedus to equip him with PowerBrick batteries because he wanted to save several tens of kilos on board. For the race, every gram counts and a few tens of kilos can make a big advantage.
So we equipped the boat with two PowerBrick 12v-100Ah (one main and one backup) to power all onboard instruments during the race. The service batteries will be recharged with solar panels.
The autonomy tests are very conclusive with twice capacity for roughly half weight. And Bastian is very happy and eager to start, so we are !

Here are some pictures of Bastian aboard his boat. We wish him good luck for the race.

_LH_2338_LH_2338
_LH_2399_LH_2399
_LH_2333_LH_2333
_LH_2326_LH_2326
_LH_2319_LH_2319
_LH_2305_LH_2305
News, Newsroom

PowerRack and PowerBrick batteries now compatible with STUDER INNOTEC inverters

Posted on by Content Team
PowerModule STUDER inverters
Off-Grid site of Refuge de l’Aigle, Parc des Ecrins, France

The PowerRack® and PowerBrick® battery ranges are now compatible with STUDER INNOTEC inverters..

The famous Swiss manufacturer of inverters for self-consumption and off-grid applications has confirmed the full compatibility between their inverters in the following range :

The PowerRack® range ensures compatibility with direct communication via the Xcom-CAN system for full battery control by the inverter.

The PowerBrick® range is compatible without the need for communication with the inverter. PowerBrick are then installed in the same way as AGM lead-acid batteries or other batteries. This installation method is faster and does not require additional cables or systems to operate.

We are delighted to work with Studer Innotec, a company that has been producing high quality energy converters for many years. Unlike other manufacturers, Studer Innotec controls the entire design of its products, which is a guarantee of reliability and an assurance of product durability.

News, Newsroom, Press releases

PowerRack® Lithium Ion batteries system is now approved by Bureau Veritas Marine & Offshore

Posted on by Content Team

PowerRack_Batteries_Lithium Ion_boats_marine_Certification_Type-of-Approval_PowerTechSystems


Poissy – July, 5th, 2018


The French manufacturer PowerTech Systems obtains the Type Approval marine certification. This for its scalable Energy Storage System product line: PowerRack®.

Press release: July 5th, 2018


The Lithium-Ion storage system is designed for electric traction in marine applications.

PowerRack® product line has been approved by the Bureau Veritas Marine and Offshore. This actor in maritime field is the world leader player in testing, inspection, certification services.

The «Type Approval» certification opens up possibilities. Indeed, the PowerRack® product line can now be used in a huge variety of hybrid and 100% electric propulsion systems for marine applications.

As a use case, PowerRack®system will be set up in 2018 on-board a 100% electric restaurant boat (Michelin-starred restaurant). It is based at the foot of Eiffel Tower. This boat will operate on the Seine river. It will use stored energy in its batteries to power the electric motors and supplies energy on board.

The modular and scalable PowerRack® system offers the possibility to set-up all kind of energy storage configuration. That is to say from 2.56 kWh to 1MWh with a voltage ranging from 51,2V to 921,6V. The PowerRack® product-line is equipped with an innovating system called “BMS-Matrix®”. It allows full control and total safety of operation.

100% compliant

In order to get this marine certification, PowerTech Systems carried out a complete series of tests (safety tests, vibration and environment tests, resistance to severe environments, etc). These tests ensure our customers that our products are rated with high level of safety and reliability for marine applications.

The «Type Approval» certification covers the whole of the lawful, technical and safety requirements. These ones are defined by Bureau Veritas Marine and Offshore for the type “Steel Ship” with passenger’s transportation.



/wp-content/uploads/sites/6/2017/12/Cyril-Bergeaud.jpg

PowerTech Systems is proud for obtaining the «Type Approval» certification for our PowerRack® energy storage system.

This French-made product offers the possibility to ramp-up green energy adoption. It could be used for large transport vehicles. Such as the river or commercial vessels which is an important source of gas for greenhouse effects.

This storage solution for green energy is all the more relevant as it replaces the diesel groups on vessels. These latters often transit or operate in the middle of our city-centers. , Cyril Bergeaud, Founder and CEO.